etrailer | Covercraft Ultra’tect Custom-Fit Outdoor Vehicle Cover Installation – 2018 Tesla Model 3

Top Rated Car Covers Up To 50% Off



Click for more info and reviews of this Covercraft Custom Covers:
l
Check out some similar Custom Covers options:
m

Click for more info and reviews of this Covercraft Custom Covers:
l
Check out some similar Custom Covers options:
m

Click for more info and reviews of this Covercraft Custom Covers:
l
Check out some similar Custom Covers options:
m

Click for more info and reviews of this Covercraft Custom Covers:
l
Check out some similar Custom Covers options:
m

Search for other popular Tesla Model 3 parts and accessories:
3

m
Don’t forget to subscribe!
v

Full transcript: x
Speaker 1: Today in our 2018 Tesla Model 3, we’re going to be taking a look at and showing you how to install the Covercraft Ultra’tect custom fit outdoor vehicle cover.This all weather outdoor cover is custom fit for your Tesla Model 3. The Weathermaxx SL construction protects your Tesla from the elements, such as rain, snow, and dust. It resists water and it’s going to protect your fine paint finish with its soft touch, which won’t leave any scratches. It also retains its shape with minimum fabric stretch.The solution-dyed fibers are going to make sure that your paint job resists fading that’s caused from those harmful UV rays. The single layer fabric is going to make storage very easy, so you can keep the cover in your vehicle or in your garage.The fabric is machine washable, although you do want to read your instructions to see what settings you need to wash and dry it on. The reinforced non-stretch grommet provides a good tie-down point for the rope that’s included with your cover, or you could purchase a vinyl-coated cable lock at etrailer.com.It also has two built-in side mirror pockets.

It also comes with an extra reinforced non-scratch grommet to install in your cover and accommodate your exterior antenna. It’s easy to install in a variety of conditions. I’ll show you how to install it now.It’s a very easy installation. The first thing you want to do is unfold your cover and make sure that you have the front in the proper position. You can tell where the front is because of this mesh rectangle, which is supposed to go over your front bumper.

If you have an extra set of hands, that will make the job easier. However, if you are alone, we’ll show you how to cover your vehicle.We’ll start with this back corner and begin to drape it over our vehicle to the rear driver’s side. You can then just go along the driver’s side of your cover and begin pulling it over top. It’s important to note that you don’t want any of the cover stretched under your vehicle until you have your side mirrors in their pockets, so we’ll do that now. We have our side mirror pocket and we can feel our side mirror right here, so we’ll just slide that over, just like that, and then repeat it on the other side.Now you can begin pulling your cover and stretching it to go under your vehicle.

We’re starting here in the back, although it doesn’t matter which side you start on. We’ll pull it down and we’ll grab our elastic part right here and pull it under. Now you can move to the other side and repeat the same process. Once you have it pulled even on all sides, you’re covered.And there you have it for the Covercraft Ultra’tect custom fit outdoor vehicle cover on our 2018 Tesla Model 3.

You May Also Like